Caution: Do not use on heavily soiled surfaces

Dilution: For waterless wash dilute 1:10 - 1:15. For rinseless wash dilute 1:256 - 1:150. For use as a drying aid: dilute 1:20.

• Do not use in direct sunlight
• Ensure the vehicle surface is cool to the touch

Rinseless Wash Method

1. Add the proper amount of EcoWash to your wash bucket and fill with water.
2. Pre-spray the panel with a light mist of EcoWash (optional but recommended for extra lubrication).
3. Using a plush wash mitt, gently wipe the panel in straight lines.
4. Flip to a clean side or switch mitts frequently to avoid dragging contamination.
5. Dry the panel immediately with a high-quality drying towel.
6. Repeat panel by panel until the entire vehicle is complete.

Waterless Wash Method

1. Mix EcoWash into a spray bottle at the correct dilution.
2. Liberally mist a small section of the vehicle—product should fully wet the surface.
3. Using a soft microfiber towel, wipe in one direction to lift dirt away.
4. Follow immediately with a second, clean towel to finish drying and polishing the surface.
5. Switch to fresh towels often to maintain safety.
   

Quick Detailer / Drying Aid

1. After washing (traditional or rinseless), lightly mist EcoWash onto a wet or dry panel.
2. Wipe with a plush microfiber towel to enhance gloss and slickness.
3. Flip to a dry side for a final buff.

For the rinseless wash method, rather than using multiple microfiber towels, you also have the option of utilizing a traditional wash mitt.

Make sure to have a secondary rinse bucket containing a small amount of ECOWash with a grit guard to ensure a clean mitt between each panel.

Tips For Best Results

• Always use high-quality, clean microfiber towels—EcoWash relies on lubrication plus proper technique.
• Work panel-by-panel, especially in warm conditions.
• For coated vehicles, EcoWash helps maintain slickness and reduces the chance of marring.
  
• When in doubt, more lubrication is always safer.